Resources · Operational challenges
35 logistics challenges and how to solve them
Why trucks leave half empty, docks congest and deliveries run late. Each challenge explains the causes, the cost and the practical steps operations teams take to fix it. Search, browse A to Z or filter by topic.
Trucks leaving half empty
See causes and fixes →
Finding out about delays too late
See causes and fixes →
Freight piling up at the cross-dock
See causes and fixes →
C
Carbon costs rising under EU ETS2
Compliance and emissions
EU ETS2 adds a carbon price to road transport fuel from 2028, so every litre of diesel will cost more. The most direct way to limit the impact is to use less fuel per unit shipped: fuller trucks, fewer empty kilometres and better network design.
Read causes and fixesComparing emissions across carriers and modes
Compliance and emissions
Emissions are hard to compare across carriers and modes when each partner reports differently or uses different factors. A common calculation method applied to shipment data gives like-for-like figures for every carrier, lane and mode.
Read causes and fixesCustomers calling to ask where their delivery is
Yard and last mile
Customers call to ask where their delivery is when they have no reliable way to see its status themselves. Sharing live delivery status and accurate arrival times removes the need to call and frees customer service teams for real problems.
Read causes and fixesD
Data trapped in disconnected systems
Orchestration and intelligence
Logistics data gets trapped when ERP, TMS, WMS and partner systems do not share information, so teams re-key data and work from different versions of the truth. An orchestration layer connects these systems so orders, shipments and events flow between them.
Read causes and fixesDetention and demurrage charges
Yard and last mile
Detention and demurrage charges build up when trucks, trailers or containers are held longer than the free time agreed with the carrier. Reducing them means planning docks and unloading around arrivals and tracking free time for every vehicle.
Read causes and fixesDisputed deliveries and missing proof of delivery
Yard and last mile
Deliveries are disputed when there is no reliable record of what was delivered, when, where and to whom. Capturing digital proof of delivery at every stop gives a clear record that settles disputes and speeds up invoicing.
Read causes and fixesE
Expensive express and expedited freight
Transport
Companies overspend on express and expedited freight when delays and shortages are discovered too late to fix with standard transport. Cutting expedites means seeing order and shipment risks earlier and solving them inside the normal plan.
Read causes and fixesF
Failed first-time deliveries
Yard and last mile
First-time deliveries fail when the recipient is not available, the address is wrong or the delivery window was not agreed. Raising first-time success means confirming details before dispatch, keeping recipients informed and giving drivers the information they need at the door.
Read causes and fixesFinding out about delays too late
Orchestration and intelligence
Logistics teams find out about delays too late when they rely on partners to report problems or customers to complain. Earlier warning comes from comparing live events with plans across the network and flagging shipments at risk before the delay reaches the customer.
Read causes and fixesFreight invoice errors and overcharges
Transport
Freight invoice errors happen when charges are checked against contracts by hand, or not at all, so wrong rates, duplicate charges and unagreed surcharges are paid. Checking every invoice against agreed rates and actual shipment events catches errors before payment.
Read causes and fixesFreight piling up at the cross-dock
Hub operations
Freight piles up at a cross-dock when inbound arrivals, sortation and outbound departures are planned separately, so goods land on the floor with nowhere to go. Keeping a cross-dock flowing means linking every inbound unit to its outbound load before it arrives, and adjusting that plan as trucks run early or late.
Read causes and fixesI
Inconsistent processes across 3PL partners
Orchestration and intelligence
Shippers working with several 3PLs see inconsistent service when each partner runs its own processes and systems. One shared execution standard across partners gives consistent processes, data and performance measurement.
Read causes and fixesL
Late deliveries in the last mile
Yard and last mile
Last-mile deliveries run late when routes are planned without realistic stop times, traffic or late departures from the hub. On-time performance improves when routes are planned on real data, departures leave on time and drivers and planners share the same live picture.
Read causes and fixesLogistics network no longer fits demand
Orchestration and intelligence
A logistics network stops fitting demand when customers, volumes and costs shift but hubs, warehouses and lanes stay the same. Regular reviews based on how freight actually moves show where to add, move or close sites and lanes.
Read causes and fixesLow hub throughput at peak
Hub operations
Hub throughput drops at peak when volume rises faster than the hub can sequence arrivals, doors and labour. Throughput improves when every unit has a planned path through the hub and the plan adjusts as conditions change during the shift.
Read causes and fixesLow OTIF performance
Orchestration and intelligence
OTIF performance falls when orders are promised without a clear view of stock, capacity and execution, so deliveries arrive late, incomplete or both. Improving OTIF means connecting orders to what is happening in hubs and transport, and acting on risks before the delivery date.
Read causes and fixesM
Manual data entry in hub operations
Hub operations
Hubs that still rely on paper, spreadsheets and re-keying lose time and accuracy at every handover. Replacing manual entry with scans and shared digital records gives teams the same accurate data at the moment they need it.
Read causes and fixesManual route planning taking too long
Yard and last mile
Route planning takes too long when planners build routes by hand in spreadsheets or maps every day. Rule-based route planning creates a workable plan in minutes and leaves planners free to handle exceptions.
Read causes and fixesMissed departure cut-offs
Transport
Shipments miss their departure cut-off when picking, loading and paperwork finish after the truck is due to leave. Hitting cut-offs means working backwards from each departure and flagging at-risk loads early enough to act.
Read causes and fixesN
No clear view of carrier performance
Transport
Shippers lack a clear view of carrier performance when delivery data arrives late, in different formats or not at all. A shared record of collection, transit and delivery events gives a fair, factual scorecard for every carrier.
Read causes and fixesNo visibility of shipments across partners
Orchestration and intelligence
Shippers lose sight of their freight when it passes between carriers, hubs and logistics partners that each keep their own records. Visibility returns when events from every partner are collected into one shared view of each order and shipment.
Read causes and fixesO
Order tracking by email and spreadsheet
Orchestration and intelligence
Teams track orders by email and spreadsheet when buyers, suppliers and logistics partners have no shared order record. A shared order platform gives every party the same status and removes the need to chase updates.
Read causes and fixesP
Picking and loading errors
Hub operations
Picking and loading errors happen when operators rely on paper lists, memory or late information to decide what goes where. Errors fall when every pick and load is checked against the plan at the point of handling, with clear instructions on a handheld device.
Read causes and fixesPreparing transport data for CSRD reporting
Compliance and emissions
Companies in scope of CSRD must report value chain emissions, and transport is often a material part. Preparing means collecting shipment-level data from operations and partners and calculating emissions with a recognised method that can stand up to assurance.
Read causes and fixesR
Rising labour costs in the warehouse
Hub operations
Warehouse labour costs rise when operators spend time searching, waiting, walking and re-handling goods rather than moving them. The fastest savings come from removing that wasted effort with guided workflows and better planning of work across the shift.
Read causes and fixesRising transport costs
Transport
Transport costs rise when freight moves in small, uncoordinated shipments, routes are planned by habit and carriers are booked late at spot rates. Lower costs come from planning transport across the network, consolidating loads and choosing the right service for each shipment.
Read causes and fixesRunning out of warehouse space
Hub operations
Warehouses run out of space when goods stay longer than planned, floor areas are used for buffering instead of flow and storage locations are not matched to how fast stock moves. Freeing space usually starts with faster flow-through and better slotting, before any expansion.
Read causes and fixesS
Split shipments arriving out of sync
Hub operations
Split shipments arrive out of sync when parts of one order travel from different origins or carriers without a shared plan, so the hub waits for the last part before it can deliver. Keeping split shipments in step means tracking every part against the order and timing consolidation at the hub.
Read causes and fixesT
Too many empty kilometres
Transport
Empty kilometres happen when vehicles drive without a load, usually on the way back from a delivery or between jobs. Cutting them means planning outbound and return legs together, sharing capacity across sites and partners and building routes around full loops.
Read causes and fixesTransport capacity not matching demand
Transport
Transport capacity falls out of step with demand when carriers are booked on forecasts that miss real volumes, leaving paid capacity unused on some days and expensive spot bookings on others. Matching capacity to demand means sharing a better forecast with carriers and updating bookings as orders firm up.
Read causes and fixesTrucks leaving half empty
Transport
Trucks leave half empty when shipments are planned site by site and carrier by carrier, so freight that could share a vehicle travels separately. The fix is to see transport demand across the network early enough to consolidate it, and to build loads around destinations rather than around individual orders.
Read causes and fixesTrucks waiting too long at the dock
Yard and last mile
Trucks wait at the dock when arrivals, dock capacity and warehouse readiness are planned separately, so vehicles turn up before a door, a crew or the goods are ready. Cutting dwell time means sharing one live view of arrivals, docks and floor activity, and adjusting slots as conditions change.
Read causes and fixesU
Unreliable Scope 3 transport emissions data
Compliance and emissions
Scope 3 transport emissions data is unreliable when it is estimated from spend or averages rather than calculated from actual shipments. Reliable figures come from operational data, such as weight, distance, mode and fill rate per shipment, calculated with a recognised method.
Read causes and fixesV
Value-added services going unbilled
Hub operations
Logistics providers lose revenue when value-added services such as relabelling, repacking or extra handling are done on the floor but never recorded for billing. Capturing every billable activity at the point of handling closes the gap between work done and work invoiced.
Read causes and fixesY
Yard congestion and lost trailers
Yard and last mile
Yards become congested and trailers go missing when gate, parking and dock movements are tracked on paper or radio. A live record of every trailer’s location and status lets teams move the right trailer to the right door at the right time.
Read causes and fixesNo matches. Try a different word or clear the topic filter.
See MIXMOVE on your own operation.
Tell us how your freight moves today and where decisions slow down, and we will show where MIXMOVE fits.