Blog
/
November 22, 2026
·
Updated
November 22, 2026
Temperature-controlled last-mile pharmaceutical delivery representing cold chain hub handover visibility
Supply Chain Strategy

Pharma Cold Chain Visibility: Closing the Handover Gap at the Hub

Temperature excursions cost the pharmaceutical industry billions a year, and the root cause is usually a handover visibility gap at the hub, not a single dramatic failure.

Industry estimates put pharmaceutical product losses from temperature excursions at up to $35 billion a year, with roughly one in three cold-chain professionals surveyed reporting excursions affecting 6% or more of their temperature-sensitive shipments, according to Cold Chain IQ's survey of pharmaceutical and medical distribution experts. A temperature excursion, any exposure outside a product's approved storage or transport range, can mean a lost batch, a quarantined shipment, or a product that never reaches a patient.

Search for inventory and warehouse management content almost never overlaps with pharmaceutical compliance and quality content. They sit in two separate publishing ecosystems, despite the fact that the handover visibility problem, knowing exactly where a temperature-sensitive consignment is, who has custody of it, and whether its conditions have been maintained, is fundamentally an operational execution problem as much as a quality one.

The Handover Visibility Problem

A temperature-sensitive shipment passes through multiple custody changes between manufacturer and patient: a warehouse, a cross-dock hub, a regional distribution centre, a last-mile carrier. Good Distribution Practice discipline, the quality standard pharmaceutical supply chains operate under, requires an unbroken chain of custody and temperature evidence across every one of those handovers. The operational reality is that batch, lot, temperature-log and chain-of-custody data often sit scattered across a transport management system, a warehouse management system and a separate quality system, assembled after the fact rather than captured as the movement actually happens.

Why Now

Good Distribution Practice expectations are not new, but the pressure to demonstrate chain-of-custody discipline in real time, rather than reconstruct it retrospectively during an audit or a quality investigation, continues to grow across pharmaceutical and healthcare distribution networks. Buyers in this space describe the problem less as a documentation gap and more as a timing gap: the evidence exists somewhere, but not in a form that can be produced the moment it is needed.

The Structural Problem: Quality Data Lives Apart From Operational Data

A warehouse management system tracks inventory. A transport management system tracks movement. A quality system tracks temperature logs and chain-of-custody documentation. None of the three was built to give a single, real-time view of a temperature-sensitive consignment's actual handling at the hub, which is exactly where storage allocation and buffer decisions are made and exactly where damage and product loss most often originate.

The result is a familiar pattern across pharmaceutical and healthcare distribution networks: a quality investigation into a reported excursion requires pulling records from three separate systems, reconciling timestamps that were never designed to line up, and hoping the hub team logged the handover correctly in the first place. By the time the investigation concludes, the product itself has usually already been written off, and the lesson learned rarely changes how the next consignment is handled, because the underlying systems have not changed either.

Five Steps to Hub-Level Execution Control for Temperature-Sensitive Consignments

  1. Identify temperature-sensitive consignments on arrival. Inbound shipments are flagged for the storage and handling rules they require before they are allocated space on the hub floor.
  2. Allocate storage and buffer space to match handling requirements. Temperature-sensitive goods are directed to the correct storage zone and buffer allocation, rather than handled under generic hub rules.
  3. Capture handling and custody events as they occur. Every movement, handover and dwell period at the hub is recorded as an operational event, not reconstructed later from separate systems.
  4. Maintain a continuous chain-of-custody trail. The record of who handled the consignment, when, and under what storage conditions is built incrementally, rather than assembled retrospectively for an audit.
  5. Make the trail available across the network. The same execution-control data is visible to every hub and partner in the network, rather than siloed at the point of origin.

How MIXMOVE Supports Temperature-Sensitive Hub Execution

MIXMOVE is an Intelligent Logistics Orchestration Platform. MIXMOVE HUB OS gives hub operators real-time execution control over storage and buffer allocation for temperature-sensitive consignments, and captures the chain-of-custody and handling data that Good Distribution Practice discipline depends on, as movement happens rather than assembled after the fact. MIXMOVE's regulatory scope remains CSRD and ETS2; MIXMOVE does not certify to, or claim to deliver, Good Distribution Practice, Good Manufacturing Practice or FDA requirements, which remain the buyer's own quality and regulatory obligations.

Skandi Network runs healthcare temperature-controlled transport for parcel and pallet shipments throughout 25 countries on MIXMOVE, using the platform's visibility and control to help reduce damage and product loss during transport through temperature monitoring across its pan-European healthcare transport network. The network's partners use the same consolidated approach to expand and optimise their own capacities, rather than each operating temperature-controlled capacity in isolation, which is the same hub-level coordination principle that underpins execution control at any single site.

MIXMOVE operates as an orchestration layer above existing WMS, TMS and quality systems, connecting through REST API, EDI, eFTI and webhooks, or as a standalone platform. Either way, the chain-of-custody data originates from the same event capture already running the hub floor, rather than a parallel system built only to satisfy an audit.

Chain-of-Custody Discipline Starts at the Hub

Temperature excursions are rarely a single dramatic failure. They are usually the accumulation of small handling gaps across multiple custody changes, the kind of gaps that hub-level execution control is built to close. The data pharmaceutical quality teams need already exists in every handling event; the question is whether it is captured in a form that can stand up to scrutiny the moment it is asked for.

See how MIXMOVE gives temperature-sensitive consignments hub-level execution control and traceability. Request an Operations Review.

Frequently Asked Questions

Does MIXMOVE provide Good Distribution Practice or GMP certification?

No. MIXMOVE's confirmed regulatory scope is CSRD and ETS2. Good Distribution Practice, Good Manufacturing Practice and FDA requirements remain the buyer's own quality and regulatory obligations; MIXMOVE provides hub-level execution control and chain-of-custody data that supports those obligations, rather than certifying to them.

How does MIXMOVE help reduce temperature excursions?

MIXMOVE HUB OS gives hub operators real-time control over storage and buffer allocation for temperature-sensitive consignments and captures handling and custody events as they occur, reducing the handling gaps where damage and product loss most often originate.

Does MIXMOVE provide temperature-sensor hardware or continuous IoT monitoring?

MIXMOVE provides hub-level execution control, storage and buffer allocation, and chain-of-custody data capture. Temperature-sensing hardware and continuous IoT monitoring are not MIXMOVE capabilities.

What is a temperature excursion?

A temperature excursion is any event where a pharmaceutical product is exposed to conditions outside its approved storage or transport range, which can result in a quarantined shipment or a lost batch.

Put these insights to work on your own operation.

Tell us how your freight moves today and where decisions slow down, and we will show where MIXMOVE fits.

NorwayTryms Vei 6, Frogn, Viken 1445, NO
PortugalEstrada da Outurela 118, Parque Holanda, Lisboa 2790-114, PT
GermanySpeditionstraße 1, Düsseldorf 40221, DE
United KingdomInnovation Centre, Gallows Hill, Warwick CV34 6UW, GB
© 2026 MIXMOVE, All rights reserved.